TAHOE STEREO UPGRADE
I installed the Eonon GMA12S in my 2008 Chevrolet Tahoe after previously using an Eonon Q80 Pro. Here is what the swap involved, the features I covered, and what to check before ordering a stereo for your own truck.
Disclosure: Eonon provided the GMA12S for this review. This page also contains affiliate links; I may earn a commission if you buy through them, at no extra cost to you.
Model note: The installation and photos below cover the GMA12S. The Amazon shopping link on this page is for a GMX6S-PRO, a different model. This review is not a hands-on test of that model; verify its current specifications and vehicle fitment separately.
The app colors did not reproduce accurately in several of my photos.
My quick take
I liked the responsive connection, Android app access, and flexibility of the GMA12S in my Tahoe. Its appearance was similar to my previous Q80 Pro, so the difference was more about the hardware and interface than a completely different dashboard look.
My installation is one vehicle example. Before ordering, confirm the exact model year, factory audio system, connectors, and any adapters or retained factory features your truck needs.
Jump to: What arrived · Installation · Features · Video · Shopping links
What was in the box?
The review unit came with the head unit, manual, and wiring. My original review described it as a GMT900-oriented unit, but check the seller’s specific fitment list instead of assuming that every truck in that platform uses the same setup.
Compared with my Q80 Pro
I already had an Eonon Q80 Pro in the Tahoe. The GMA12S looked similar at first glance, while the review unit’s hardware was listed as Android 12 with a Snapdragon 665, eight-core CPU, and Adreno 610 graphics. Those details describe the original GMA12S review unit, not every current Eonon listing.
How the installation went in my Tahoe
This is an overview of the swap I filmed. Follow the instructions for your vehicle and the exact unit and harness you purchase.
- Remove the surrounding trim. I used a panel trim tool to release the trim around the stereo.
- Remove the mounting bolts. The bolts in my Tahoe were 7mm.
- Disconnect the existing unit. I unplugged the connectors and antenna before removing it.
- Connect the replacement harness and accessories. My setup included GPS, microphone, USB, and backup-camera connections. The earlier Q80 Pro installation guide has more detail on my accessory installation.
- Test before putting the trim back. I checked power and device connection before finishing the installation.
Features covered in my review
- A clear screen and responsive Bluetooth connection in my testing.
- Android apps and access to the Play Store.
- GPS navigation and microphone, USB, and backup-camera connections in my installation.
- Customizable lighting.
- 4G/SIM and OBD2 compatibility discussed in the original review. Check the exact unit’s requirements and compatible accessories before relying on those features.
The video below shows the unit in use and the installation behind this review.
Watch the complete install and review
Check current models and fitment
The product linked below is the GMX6S-PRO, not the GMA12S tested above. Compare the current listing with your vehicle and factory equipment before buying. Prices, bundles, and availability can change.
View the GMX6S-PRO listing on Amazon →
Browse the linked Eonon store listing →
The earlier offer on this page used code Auto10 for $10 off an order of $100. Its current availability is unverified; check the terms and final total at checkout.
For another hands-on Tahoe project, read how I diagnosed an ABS fault with the ANCEL X7.