I Built a Miata OBD2 Reader With ChatGPT: What Worked and What Didn’t
By Chris DeDecker · AutoMotivate
I wanted to see how close I could get to an expensive scan tool with a laptop, an OBD2 adapter, and some help from ChatGPT. The test car? My 2002 Mazda Miata.
I had three things in mind: live gauges, reading and clearing engine codes, and seeing whether I could control something like the radiator fan. Some of that worked surprisingly well. Some of it was a good reminder that talking to a car is not the same as having full control over it.
From an idea to a working Miata reader
I used ChatGPT to work through the idea and Codex to build the app. I wanted something easier to navigate than the confusing scanner menus I have dealt with before: clear gauges, useful searches, and a way to save what the car was doing.
The first connection was through a wired OBD2 adapter and my computer. Once the ignition was on and communication was working, I could see live engine data. Watching the RPM respond and the coolant temperature come through was the moment this stopped being just a coding experiment.
What I got working
- Live readings: RPM, coolant temperature, and other data the car made available.
- Sensor searches and watchlists: a quicker way to find readings and group the ones I wanted to watch together.
- Graphs and reports: viewing changes over time, exporting data, and saving an HTML graph report.
- Trouble codes: detecting a pending fault and working on clearer explanations instead of just showing a code number.
- Reading and clearing codes on the head unit: after some revisions, I got the app communicating on an Android head unit too.
The project started on my computer, then I transferred an Android version to the head unit. That was not completely smooth on the first try, but I got live readings working there, including a Bluetooth connection by the end.
Where I stopped
The radiator-fan test was a different story. Reading standard OBD2 data does not automatically give an app access to manufacturer-specific actuator commands. I did not get that control working, and I was not going to keep sending unknown commands just to see what happened.
This is not a finished replacement for a professional bidirectional scan tool, and it is not an ECU-tuning app. It is a project I tested on my Miata. What works on another car will depend on the vehicle, adapter, and software.
Also, clearing a code does not fix the underlying problem. Save the information you need first, and do your testing while parked rather than interacting with the app while driving.
The adapters
Here are the two adapter links for anyone looking into a setup like this. Check compatibility with your vehicle, device, and app before buying; a connector that fits is not a guarantee that every feature will work.
Affiliate disclosure: These are affiliate links. I may earn a commission if you purchase through them, at no extra cost to you.

Vgate vLinker FS USB
A wired USB OBD2 adapter.

UMEIJA Bluetooth 5.4 OBD2 scanner
A wireless OBD2 adapter. The phone screen in this product picture is promotional imagery, not my Miata Reader app.
Will Miata Reader be open source?
If enough of you want to try it, I would like to make Miata Reader available as an open-source project. That would let people look at the code, build on it, and adapt it to their own setup.
It is not available to download yet. Before sharing it, I still need to clean things up and check for sensitive details. There is no release date right now.
If you would use it, leave a comment on YouTube and tell me what car and device you would want to run it on. I am also curious which feature matters most to you: simple gauges, better code explanations, graphs, or something else.